Waterproof 2-Way Communication Set for Kite/Wind Instruction – BbTALKIN 3.0 with Helmet Headset and Baseball Cap Headset (IPX7 Rated)
Stay connected while on the water with this fully waterproof 2-way communication system featuring our BbTALKIN 3.0 Standard Units. Designed for coaches and students, this package includes a waterproof helmet headset for the rider and a waterproof mesh baseball cap headset for the instructor. (Helmet not included – sold separately.)
Perfect for lessons, this set delivers hands-free, real-time voice communication with crystal-clear audio. No worries when you fall into the water, these headsets can be submerged. Both headsets are IPX7-rated waterproof and ideal for wet, windy environments.
Package Highlights:
Helmet Headset (Student): Securely attaches to most water helmets using marine-grade Velcro. Compatible with nearly all helmet models except rubber-coated ones. Recommend installing onto a flat surface.
Waterproof Baseball Cap Headset (Coach): Adjustable snapback mesh cap with boom microphone on the left side. Comfortable and breathable with a secure fit.
Interchangeable Parts: Both headsets use the same waterproof microphone and speaker pieces—easily replaceable if damaged over time.
Optional Foam Earpads: Add ear pads to reduce wind and water noise, keeping volume consistent during instruction. Especially helpful for coaching young or new students.
Why Instructors Love It:
100% waterproof components
Real-time, hands-free communication (no push-to-talk)
Long-range Bluetooth connection
Ideal for kiteboarding, wakeboarding, and all water sports
PACKAGE INCLUDES:
x1: A02SD – Standard 3.0 – 2 Piece Set
x1: B01CR – Baseball Cap
x1: B02R – Single Sided Helmet Speaker Pad
** Package does not include helmet. Our helmet speaker pads are universal and will work on most any water helmet. Only restriction is your helmet cannot be rubber painted. If you wish to add a helmet to your order, you can do so separately. Click here to see the universal helmet we offer.
SKUs: A02SD + B02R + B01CR
EAN: 4713309040597 + 4713309040221 + 4713309040375
Bb 3.0 Standard 2 Piece Set:
Waterproof Helmet Headset with left side speaker:
Waterproof Baseball Cap Headset with left sided boom microphone:
- Use fresh water to wash all of the headset.
- Make sure to rinse the microphone and speaker piece.
- DO NOT use high pressure spray.
- It is best to submerge in a bucket of fresh water for a through wash.
- Hang to dry in a well ventilated climate controlled (a/c) environment.
- Over time, the male 3.5 jack on the headset may become corroded. (dull in color) Make sure to keep this clean by a cloth or scotch bright. Do not use any cleaning solution.
To extend headset life in saltwater environments, occasionally apply Nyogel 760G Dielectric Synthetic Grease to the 3.5mm audio jack to prevent corrosion.
Here is a helpful salt water care video.
If using in salt water, you must fresh water rinse. Failure to do so can cause corrosion and product failure.
HOW TO INSTALL SINGLE SIDED HELMET SPEAKER PAD (B02R):
If using in salt water, you must fresh water rinse. Failure to do so can cause corrosion and product failure.
1. Use the alcohol prep to clean up the helmet surface. You must clean the surface of your helmet to insure the 3m tape will adhere to the surface. The 3m tape will not adhere to rubber surfaces.
2. Attach the helmet speaker pad Velcro tape onto the helmet, left side, just above the helmet ear opening.
3. Run your helmet strap through the elastic band on the helmet speaker pad. This is important! Failure to do this step can cause the rubber to rip on your helmet speaker pad.
4. Install the plastic mount onto the left side of your helmet, just above the headset. (The rubberband helmet mount comes with your Advance Unit set)
5. Stretch each rubberband around the waterproof case and secure the band to the bottom of the mount.
6. Plug in the 3.5mm audio cable. Make sure the cable is tight and secure. Failure to do so will cause water intrusion into the casing. Any water damage to the unit within the casing is not covered under warranty.
7. Make sure after each use that your case is secure and sealed.
HOW TO INSTALL ON YOUR BASEBALL CAP (B01CR):
1. Install the plastic clip mount onto the cap. (Mount comes with Advance Unit set)
Separate the Velcro, install the bottom forks first then the top forks. Make sure the mounting spaces are on the top.
2. Install the two tabs on the waterproof case into the mounting spaces on the plastic mount. Snap one side down, then the other side down to lock in the case. Make sure both sides of the waterproof case are securely locked into the mount.
3. Plug in the boom microphone’s 3.5mm audio cable. Make sure the cable is tight and secure. Failure to do so will cause water intrusion into the casing. Any water damage to the unit within the casing is not covered under warranty.
4. Make sure after each use that your case is secure and sealed.
From the date of purchase, the helmet speaker pad and surf hat plus all it’s components are covered for 6 months. The Bb 3.0 Units are covered for 1 year from the date of purchase. Please see our warranty section for complete warranty details.
